NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual page 202

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
If you do not specify an IP address, then only the Invalid Server Address field is displayed.
Otherwise other listed fields are displayed.
Invalid Server
Addresses
Server IP
Address
Round Trip Time
Access Requests
Access
Retransmission
Access Accepts
Access Rejects
Access
Challenges
Malformed Access
Responses
Bad
Authenticators
11-20
The number of RADIUS Access-Response packets received
from unknown addresses.
IP Address of the Server.
The time interval, in hundredths of a second, between the
most recent Access-Reply, Access-Challenge and the Access-
Request that matched it from the RADIUS authentication
server.
The number of RADIUS Access-Request packets sent to this
server. This number does not include retransmissions.
The number of RADIUS Access-Request packets retransmit-
ted to this RADIUS authentication server.
The number of RADIUS Access-Accept packets, including
both valid and invalid packets, which were received from this
server.
The number of RADIUS Access-Reject packets, including
both valid and invalid packets, which were received from this
server.
The number of RADIUS Access-Challenge packets, includ-
ing both valid and invalid packets, which were received from
this server.
The number of malformed RADIUS Access-Response pack-
ets received from this server. Malformed packets include
packets with an invalid length. Bad authenticators or signa-
ture attributes or unknown types are not included as mal-
formed access responses.
The number of RADIUS Access-Response packets contain-
ing invalid authenticators or signature attributes received
from this server.
Port-Based Access and Authentication Commands
v4.1, October 2008