Qos-Mode; Show Stack-Port - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual
Layer-3 stackable switches, software version 7.3
Hide thumbs
Also See for GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch:
- Cli manual (787 pages) ,
- Hardware installation manual (42 pages) ,
- Administration manual (561 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
17.2.2 qos-mode
This command enables QOS mode for front panel stacking.
Default
Format
Mode
17.2.2.1 no qos-mode
This command disables QOS mode for front panel stacking.
Format
Mode
17.2.3 show stack-port
This command displays summary stack-port information for all interfaces.
Format
Mode
QOS Mode
For Each Interface:
Unit
Interface
Configured Stack
Mode
Running Stack
Mode
Link Status
Link Speed
Stacking Commands
enabled
qos-mode
Stack Global Config
no qos-mode
Stack Global Config
show stack-port
Privileged EXEC
Front Panel Stacking QOS Mode for all Interfaces
Displays the unit number.
Displays the slot and port numbers.
Stack or Ethernet
Stack or Ethernet
Status of the link
Speed (Gb/s) of the stack port link
v4.1, October 2008
17-11
Advertisement
Chapters
Table of Contents
