Session-Timeout; Telnetcon Maxsessions - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

3.4.5 session-timeout

This command sets the telnet session timeout value.The timeout value unit of time is
minutes. A value of 0 indicates that a session remains active indefinitely.
Default
Format
Mode
3.4.5.1 no session-timeout
This command sets the telnet session timeout value to the default. The timeout value unit
of time is minutes.
Format
Mode

3.4.6 telnetcon maxsessions

This command specifies the maximum number of telnet connection sessions that can be
established. A value of 0 indicates that no telnet connection can be established. The range
is 0 to 5.
Default
Format
Mode
3.4.6.1 no telnetcon maxsessions
This command sets the maximum number of telnet connection sessions that can be
established to the default value.
Format
Mode
Administrative Access Commands
0
session-timeout <0-160>
Line Config
no session-timeout
Line Config
5
telnetcon maxsessions <0-5>
Privileged EXEC
no telnetcon maxsessions
Privileged EXEC
v4.1, October 2008
3-11