Show Ip Ospf Interface <Unit/Slot/Port - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Modes
Interface
OSPF Admin
Mode
OSPF Area ID
Router Priority
Hello Interval
Dead Interval
Retransmit
Interval
Transit Delay
Interval
LSA Ack Interval
14.5.44 show ip ospf interface <unit/slot/port>
This command displays the information for the IFO object or virtual interface tables.
Format
Modes
IP Address
Subnet Mask
OSPF Admin
Mode
OSPF Area ID
14-46
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
States whether OSPF is enabled or disabled on a router inter-
face.
Represents the OSPF Area Id for the specified interface.
A number representing the OSPF Priority for the specified
interface.
A number representing the OSPF Hello Interval for the speci-
fied interface.
A number representing the OSPF Dead Interval for the speci-
fied interface.
A number representing the OSPF Retransmit Interval for the
specified interface.
A number representing the OSPF Transit Delay for the speci-
fied interface.
A number representing the OSPF LSA Acknowledgement
Interval for the specified interface.
show ip ospf interface <unit/slot/port>
Privileged EXEC
User EXEC
Represents the IP address for the specified interface.
A mask of the network and host portion of the IP address for
the OSPF interface.
States whether OSPF is enabled or disabled on a router inter-
face.
Represents the OSPF Area Id for the specified interface.
v4.1, October 2008
Routing Commands