NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual page 194

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Reauthentication
Period
Reauthentication
Enabled
Key Transmission
Enabled
Control Direction
If you use the optional parameter
statistics for the specified port appear.
Port
EAPOL Frames
Received
EAPOL Frames
Transmitted
EAPOL Start
Frames Received
EAPOL Logoff
Frames Received
Last EAPOL
Frame Version
Last EAPOL
Frame Source
EAP Response/Id
Frames Received
11-12
The timer used by the authenticator state machine on this port
to determine when reauthentication of the supplicant takes
place. The value, in seconds, has a range of 1 - 65535.
Indicates if reauthentication is enabled on this port. Possible
values are 'True" or "False".
Indicates if the key is transmitted to the supplicant for the
specified port. Possible values are True or False.
Indicates the control direction for the specified port or ports.
Possible values are both or in.
[statistics <unit/slot/port>]
The interface whose statistics are displayed.
The number of valid EAPOL frames of any type that have
been received by this authenticator.
The number of EAPOL frames of any type that have been
transmitted by this authenticator.
The number of EAPOL start frames that have been received
by this authenticator.
The number of EAPOL logoff frames that have been received
by this authenticator.
The protocol version number carried in the most recently
received EAPOL frame.
The source MAC address carried in the most recently
received EAPOL frame.
The number of EAP response/identity frames that have been
received by this authenticator.
Port-Based Access and Authentication Commands
v4.1, October 2008
, the following dot1x