Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Packets
Discarded
7.4.7 bootpdhcprelay backup-serverip
To configure the IP address of the backup DHCP server <ipaddr>, use the
bootpdhcprelay backup-serverip command. When the DHCP client request is received,
the switch forwards the request to both the master DHCP server and the backup DHCP
server. Use no bootpdhcprelay backup-serverip to disable the backup server. The "show
bootpdhcprelay" command output indicates requests forwarded to the backup server.
Format
Mode
Default
7-18
Is the number of packets discarded.
bootpdhcprelay backup-serverip
no bootpdhcprelay backup-serverip
Global Config
no bootpdhcprelay backup-serverip
v4.1, October 2008
<ipaddr>
DHCP Commands