Clear Pass; Enable Passwd; Clear Port-Channel; Clear Traplog - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

19.2.5 clear pass

This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format
Mode

19.2.6 enable passwd

This command prompts you to change the Privileged EXEC password.
Format
Mode

19.2.7 clear port-channel

This command clears all port-channels (LAGs).
Format
Mode

19.2.8 clear traplog

This command clears the trap log.
Format
Mode

19.2.9 clear vlan

This command resets VLAN configuration parameters to the factory defaults.
Format
Mode

19.2.10 copy

The command uploads and downloads files to and from the switch. You can upload
copy
and download files from a server by using TFTP, Xmodem, Ymodem, or Zmodem.
Format
Mode
System Maintenance Commands
clear pass
Privileged EXEC
enable passwd
User EXEC
clear port-channel
Privileged EXEC
clear traplog
Privileged EXEC
clear vlan
Privileged EXEC
copy <source> <destination>
Global Config
v4.1, October 2008
19-19