Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Packets
Discarded
7.4.7 bootpdhcprelay backup-serverip
To configure the IP address of the backup DHCP server <ipaddr>, use the
bootpdhcprelay backup-serverip command. When the DHCP client request is received,
the switch forwards the request to both the master DHCP server and the backup DHCP
server. Use no bootpdhcprelay backup-serverip to disable the backup server. The "show
bootpdhcprelay" command output indicates requests forwarded to the backup server.
Format
Mode
Default
DHCP Commands
Is the number of packets discarded.
bootpdhcprelay backup-serverip
no bootpdhcprelay backup-serverip
Global Config
no bootpdhcprelay backup-serverip
v3.0, January 2008
<ipaddr>
7-19