Printer Control Board And Fan - OKIDATA OF2600 Service Manual

3.2.27 Printer Control Board and Fan

1. Perform procedures
3.2.02
3.2.04
2. Detach the two connectors CN2 and CN3 from the power supply board.
3. Remove the two screws.
4. Disconnect the fan cable from CN7 of the printer control board.
5. Remove the remaining connectors from the printer control board.
6. Remove the printer control board.
7. Remove the two screws. Then, remove the fan.
P/N N/A
P/N 55075301
P/N 55075501
P/N 56511201
Service Guide OF2200/2400/2600
Screw
PCB: PCNT-250
PCB: DFPU
Fan
Chapter 3 Disassembly & Maintenance
2200 RSPL
2400/2600 RSPL
RSPL
B.2.08
B.2.08
B.2.08
B.2.08 , 17
Page: 145