Main Control Board, Second Tray Interface Board - OKIDATA OF2600 Service Manual

3.2.19 Main Control Board, Second Tray Interface Board

1. Perform procedures
3.2.03
3.2.08
2. Remove the three screws (A).
3. Lift the main control board, and remove the connectors.
4. Remove the main control board.
5. Disconnect the connector.
6. Remove the screw (B), then remove the second tray interface board.
P/N 55076001 PCB: MT-25
P/N 55076102 PCB: DFCU/MCNT-350
P/N 55073901 PCB: Second Tray Interface
P/N 55075901 PCB: CB -250
P/N 55076202 PCB: CB -350
P/N 51710701 Edge Saddle
P/N N/A Screw
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
2200
2400/2600
RSPL
2200
2400/2600
B.2.11
B.2.11
B.2.11
B.2.11
B.2.11
B.2.11
B.2.11
Page: 137