Paper Inlet Jam - OKIDATA OF2600 Service Manual

Paper Inlet Jam

This jam occurs when either of the following situations occur.
· When the printer is powered ON, paper is at inlet sensor 1.
· After the hopping operation is attempted three times, the leading edge of the paper does NOT reach
inlet sensor 1.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
Chapter 1 Principles of Operation
Page: 38