Printing Process - General Information - OKIDATA OF2600 Service Manual

Page: 35
Service Guide OF2200/2400/2600
Chapter 1 Principles of Operation

1.5 PRINTING PROCESS - General Information

1.5.01 General Information
Hopping and feeding are controlled by a single registration motor.
Turning the registration motor in the "A" direction drives the hopping roller.
Turning the registration motor in the "B" direction drives the registration roller.
The registration gear and hopping gear contain one-way bearings. Turning each of these gears in the
reverse direction will NOT turn the corresponding roller.
Printing Process Diagram