RAP 03 Print Test Failure
START
Perform the Self Diagnosis Test.
Is the Self Diagnosis Test OK?
YES End of procedure.
NO Perform the Print Test.
Is the Print Test OK?
NO Refer to the RAP 21.
YES Replace the printer control board.
Has the problem been resolved?
YES End of procedure.
NO Replace the main control board.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Page: 50