RAP 10 LED Test Failure
START
Perform the LED TEST.
Do all of the listed LEDs light?
Okifax 2200
ALARM > PHOTO >DARK > NORMAL> LIGHT> AUTO REC
Okifax 2400/2600
ALARM > PHOTO > EX.FINE > FINE > STD> LIGHT> NORMAL> DARK >AUTO REC
YES End of procedure.
NO Replace the operator panel board.
Has the problem been resolved?
YES End of procedure.
NO Check the connection cable between the main control board and the
operator panel unit.
Has the problem been resolved?
YES End of procedure.
NO Replace the main control board.
End of procedure.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Page: 58