RAP 20B Printer Alarm 1
START
"PRINTER ALARM 1" appears on LCD display.
Power OFF the unit, the power ON.
Does "PRINTER ALARM 1" remain on display?
NO Refer to Action Item 3.
YES Are the connections of the interface cable between the main
control board (CN11) and the printer control board (CN10) correctly made?
NO Correctly make the connections.
YES Refer to Action Item 4.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
End of procedure.
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Page: 70