3.2.22 Manual Feed Guide, Eject Roller, and Fusing Unit Assemblies
1. Perform procedure
3.2.21
2. Detach the two hooks by pressing inward on the retainers, then remove the manual feed guide
assembly.
3. Using a flat blade screwdriver, press the latch inward and hold, while lifting the eject roller assembly
up and out.
4. Remove the four screws.
5. Remove the fusing unit assembly.
NOTE:
When lubricating, refer to Module 3.5
P/N 50217501 Unit: Fuser 120V (Assembly)
P/N 51010903 Strip: Anti-Static
P/N 51011001 Guide: Manual Feed Assembly
P/N 53342801 Roller: Eject Assembly
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
of this Service Handbook.
RSPL
RSPL
RSPL
B.2.06
B.2.06
B.2.06
B.2.06
Page: 140