Pc-1, Pc-2, And Pinch Roller - OKIDATA OF2600 Service Manual

3.2.17 PC-1, PC-2, and Pinch Roller

NOTE:
There are two PC-1 sensors (Doc. Detect & B4 Size) on the OF 2200/2400.
There are three PC-1 sensors (Doc. Detect & B4 Size & A3 Size) on the OF 2600.
All three products contain one PC-2 sensor (Read Station).
Each sensor has one hook and one connector.
1. Perform this procedure:
2. Disconnect the three connectors on the 2200 and 2400 units, the OF 2600 has four connectors.
3. Using a straight-slot screwdriver, open the sensor latches
4. Remove the PC1 sensors and the PC2 sensor.
5. Push the two pinch springs and slide out the pinch roller shaft.
6. Remove the pinch roller.
P/N 50407301 Sensor: PC1/B4/A3 (Assembly) RSPL
Includes the items listed below.
P/N N/A Bracket: PC
P/N N/A Sensor: Photo
P/N N/A Lever: PC1
P/N 50407401 Sensor: PC2 (Assembly)
Includes the items listed below.
P/N N/A Bracket: PC
P/N N/A Lever: PC2
P/N N/A Sensor: Photo
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
3.2.13.
RSPL
B.2.13
B.2.13
B.2.13
B.2.13
B.2.13
B.2.13
B.2.13
B.2.13
Page: 135