Snmp-Server User; Table 4-42 Snmp Group - SMC Networks 6824MPE INT Management Manual

Field
groupname
security model
readview
writeview
notifyview
storage-type
Row Status

snmp-server user

Use this command to add a user to an SNMP group, restricting the user to a
specific SNMP Read and a Write View. Use the no form to remove a user
from an SNMP group.
Syntax
snmp-server user username groupname {v1 | v2c | v3 [encrypted]
[auth {md5 | sha} auth-password [priv des56 priv-password]]
no snmp-server user username
• username - Name of user connecting to the SNMP agent. (Range: 1-32
characters)
• groupname - Name of an SNMP group to which the user is assigned.
(Range: 1-32 characters)
• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
• encrypted - Accepts the password as encrypted input.
• auth - Uses SNMPv3 with authentication.
• md5 | sha - Uses MD5 or SHA authentication.
• auth-password - Authentication password. Enter as plain text if the
encrypted option is not used. Otherwise, enter an encrypted
password. (A minimum of eight characters is required.)
• priv des56 - Uses SNMPv3 with 56-bit DES data encryption.
• priv-password - Privacy password. Enter as plain text if the encrypted
option is not used. Otherwise, enter an encrypted password.

Table 4-42 SNMP Group

Description
Name of an SNMP group.
The SNMP version.
The associated read view.
The associated write view.
The associated notify view.
The storage type for this entry.
The row status of this entry.
SNMP C
OMMANDS
4-171