Table 4-35 Mapping Cos Values To Acl Rules - SMC Networks 6824MPE INT Management Manual

Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• You must configure an ACL mask before you can map CoS values to the
rule.
• A packet matching a rule within the specified ACL is mapped to one of
the output queues as shown in the following table. For information on
mapping the CoS values to output queues, see queue cos-map on
page 4-248.

Table 4-35 Mapping CoS Values to ACL Rules

Queue
Priority
Example
Console(config)#interface ethernet 1/2
Console(config-if)#map access-list ip bill cos 0
Console(config-if)#
Related Commands
queue cos-map (4-248)
show map access-list ip (4-140)
0
1,2
A C
CCESS ONTROL
1
0,3
L C
IST OMMANDS
2
4,5 6,7
3
4-139