Command Line Processing; Table 4-3 Keystroke Commands - SMC Networks 6824MPE INT Management Manual

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and
parameters as long as they contain enough letters to differentiate them from
any other currently available commands or parameters. You can use the Tab
key to complete partial commands, or enter a partial command followed by
the "?" character to display a list of possible matches. You can also use the
following editing keystrokes for command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or
backspace key

Table 4-3 Keystroke Commands

Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of the line.
Repeats current command line on a new line.
Enters the last command.
Repeats current command line on a new line.
Deletes from the cursor to the beginning of the line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
E C
NTERING OMMANDS
4-11