Ip Http Secure-Port; Table 4-13 Https System Support - SMC Networks 6824MPE INT Management Manual

C L
OMMAND INE
• The following web browsers and operating systems currently support
HTTPS:
Internet Explorer 5.0 or later
Netscape Navigator 4.76 or later
• To specify a secure-site certificate, see "Replacing the Default Secure-site
Certificate" on page 4-67. Also refer to the copy command on page 4-84.
Example
Console(config)#ip http secure-server
Console(config)#
Related Commands

ip http secure-port (4-44)

copy tftp https-certificate (4-84)
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL
connection to the switch's web interface. Use the no form to restore the
default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
4-44
I
NTERFACE

Table 4-13 HTTPS System Support

Web Browser Operating System
Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6