Table of Contents
Advertisement
C
ONFIGURING THE
Command Attributes
•
Source/Destination Address Type – Use "Any" to include all
possible addresses, "Host" to indicate a specific MAC address, or
"MAC" to specify an address range with the Address and Bitmask
fields. (Options: Any, Host, MAC; Default: Any)
•
Source/Destination Subnet Mask – Subnet mask for source or
destination address. (See the description for SubMask on page 3-90.)
•
Protocol Bitmask – Check the protocol field.
•
Service Type Mask – Check the rule for the specified priority type.
(Options: Precedence, TOS, DSCP; Default: TOS)
•
Source/Destination Port Bitmask – Protocol port of rule must
match this bitmask. (Range: 0-65535)
•
Control Code Bitmask – Control flags of rule must match this
bitmask. (Range: 0-63)
3-98
S
WITCH
Advertisement
Table of Contents
Need help?
Do you have a question about the 6824MPE INT and is the answer not in the manual?