Show Power Inline Status - SMC Networks 6824MPE INT Management Manual

C L
OMMAND INE
Default Setting
3 (low)
Command Mode
Interface Configuration
Command Usage
• If the power demand from devices connected to the switch exceeds the
power budget setting, the switch uses port power priority settings to
control the supplied power. For example:
- A device connected to a low-priority port that causes the switch to
exceed its budget is not supplied power.
- A device connected to a critical or high-priority port that causes the
switch to exceed its budget is supplied power, but the switch drops
power to one or more lower-priority ports.
• Power is dropped from low-priority ports in sequence starting from port
number 1.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline priority 2
Console(config-if)#
Related Commands
power mainpower maximum allocation (4-93)

show power inline status

Use this command to display the current power status for all ports or for
specific ports.
Syntax
show power inline status [
interface
ethernet
- unit - This is device 1.
- port - Physical port number on the switch (Range: 1-26).
4-96
I
NTERFACE
interface
]