C
ONFIGURING THE
Displaying Interfaces Attached to a Multicast Router
Multicast routers that are attached to ports on the switch use information
obtained from IGMP, along with a multicast routing protocol such as
DVMRP, to support IP multicasting across the Internet. These routers
may be dynamically discovered by the switch or statically assigned to an
interface on the switch.
You can use the Multicast Router Port Information page to display the
ports on this switch attached to a neighboring multicast router/switch for
each VLAN ID.
Command Attributes
•
VLAN ID – ID of configured VLAN (1-4094).
•
Multicast Router List – Multicast routers dynamically discovered by
this switch or those that are statically assigned to an interface on this
switch.
Web – Click IGMP, Multicast Router Port Information. Select the required
VLAN ID from the scroll-down list to display the associated multicast
routers.
3-202
S
WITCH
Figure 3-91 Multicast Router Port Information
Need help?
Do you have a question about the 6824MPE INT and is the answer not in the manual?