Table of Contents
Advertisement
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
"Displaying System Information" on page 3-11.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System description: Intelligent Fast Ethernet PoE Switch; SW version:
V2.3.3.5
System OID string: 1.3.6.1.4.1.259.6.10.56
System information
System Up time:
seconds
System Name:
System Location:
System Contact:
MAC address:
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server
Telnet server port
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device Test..............PASS
Switch Int Loopback test.....PASS
Done All Pass
Console#
show users
Shows all active console and Telnet sessions, including user name, idle time,
and IP address of Telnet client.
Default Setting
None
S
YSTEM
0 days, 1 hours, 34 minutes, and 7.77
Intelligent Fast Ethernet PoE Switch
TPS 1st Floor
Geoff
00-30-F1-B3-16-C0
enabled
80
enabled
443
: enable
: 23
M
C
ANAGEMENT
OMMANDS
4-81
Advertisement
Table of Contents
