Setting Snmpv3 Views - SMC Networks 6824MPE INT Management Manual

C
ONFIGURING THE
CLI – Use the snmp-server group command to configure a new group,
specifying the security model and level, and restricting MIB access to
defined read and write views.
Console(config)#snmp-server group v3secure v3 priv read defaultview
write defaultview
Console(config)#exit
Console#show snmp group
Group Name: v3secure
Security Model: v3
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: nonvolatile
Row Status: active
Console#

Setting SNMPv3 Views

SNMPv3 views are used to restrict user access to specified portions of the
MIB tree. The predefined view "defaultview" includes access to the entire
MIB tree.
Command Attributes
• View Name – The name of the SNMP view. (Range: 1-64 characters)
• View OID Subtrees – Shows the currently configured object
identifiers of branches within the MIB tree that define the SNMP view.
• Edit OID Subtrees – Allows you to configure the object identifiers of
branches within the MIB tree. Wildcards can be used to mask a specific
portion of the OID string.
• Type – Indicates if the object identifier of a branch within the MIB
tree is included or excluded from the SNMP view.
3-56
S
WITCH
4-169
4-170