Spanning-Tree Max-Age; Spanning-Tree Priority - SMC Networks 6824MPE INT Management Manual

spanning-tree max-age

Use this command to configure the spanning tree bridge maximum age
globally for this switch. Use the no form to restore the default.
Syntax
spanning-tree max-age seconds
no spanning-tree max-age
seconds - Time in seconds. (Range: 6-40 seconds)
The minimum value is the higher of 6 or [2 x (hello-time + 1)].
The maximum value is the lower of 40 or [2 x (forward-time - 1)].
Default Setting
20 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) a device can wait
without receiving a configuration message before attempting to
reconfigure. All device ports (except for designated ports) should receive
configuration messages at regular intervals. Any port that ages out STA
information (provided in the last configuration message) becomes the
designated port for the attached LAN. If it is a root port, a new root port
is selected from among the device ports attached to the network.
Example
Console(config)#spanning-tree max-age 40
Console(config)#

spanning-tree priority

Use this command to configure the spanning tree priority globally for this
switch. Use the no form to restore the default.
Syntax
spanning-tree priority priority
S T
PANNING REE
C
OMMANDS
4-215