Table of Contents
Advertisement
Basic Configuration
Displaying System Information
You can easily identify the system by providing a descriptive name,
location and contact information.
Command Attributes
•
System Name – Name assigned to the switch system.
•
Object ID – MIB II object ID for switch's network management
subsystem.
•
Location – Specifies the system location.
•
Contact – Administrator responsible for the system.
•
System Up Time – Length of time the management agent has been
up.
These additional parameters are displayed for the CLI.
•
S/W Version # – The current software version number.
•
MAC Address – The physical layer address for this switch.
•
Web server – Shows if management access via HTTP is enabled.
•
Web server port – Shows the TCP port number used by the web
interface.
•
Web secure server – Shows if management access via HTTPS is
enabled.
•
Web secure server port – Shows the TCP port used by the HTTPS
interface.
•
Telnet server – Shows if management access via Telnet is enabled.
•
Telnet server port – Shows the TCP port number used by Telnet.
•
Authentication login – Defines the login authentication method and
precedence.
•
Authentication enabled – Defines the authentication method and
precedence to use when changing from Exec command mode to
Privileged Exec command mode
•
POST result – Shows results of the power-on self-test.
B
C
ASIC
ONFIGURATION
3-11
Advertisement
Table of Contents
Need help?
Do you have a question about the 6824MPE INT and is the answer not in the manual?