SMC Networks 6824MPE INT Management Manual page 133

CLI – This example sets the 802.1x parameters on port 2. For a
description of the additional fields displayed in this example, see "show
dot1x" on page 4-119
Console(config)#interface ethernet 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#dot1x re-authentication
Console(config-if)#dot1x max-req 5
Console(config-if)#dot1x timeout quiet-period 40
Console(config-if)#dot1x timeout re-authperiod 5
Console(config-if)#dot1x timeout tx-period 40
Console(config-if)#exit
Console(config)#exit
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
Authorized
1/1 disabled
1/2 enabled
.
.
1/25 disabled
1/26 disabled
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Disable
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout: 50
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant
Current Identifier
Authenticator State Machine
State
Reauth Count
Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State
.
802.1X is disabled on port 1/26
Console#
Operation Mode
Single-Host
Single-Host
Single-Host
Single-Host
3600
60
30
30
2
2
Unauthorized
Single-Host
5
Auto
00-00-00-00-00-00
0
Initialize
0
Initialize
0
0
Initialize
U A
SER UTHENTICATION
Mode
ForceAuthorized
Auto
ForceAuthorized
ForceAuthorized
4-174
4-114
4-116
4-114
4-117
4-117
4-118
4-119
yes
n/a
n/a
n/a
3-83