SMC Networks 6824MPE INT Management Manual page 191

Command Attributes
• Port – The port number on the switch.
• Admin Status – Enables PoE power on the port. Power is
automatically supplied when a device is detected on the port, providing
that the power demanded does not exceed the switch or port power
budget. (Default: Enabled)
• Priority – Sets the power priority for the port. (Options: Low, high, or
critical; Default: Low)
• Power Allocation – Sets the power budget for the port.
(Range: 3000- 15400 milliwatts; Default: 15400 milliwatts)
Web – Click PoE, Power Port Configuration. Enable PoE power on
selected ports, set the priority and the power budget, and then click Apply.
Figure 3-62 Configuring Port PoE Power
CLI – This example sets the PoE power budget for port 1 to 8 watts, the
priority to high (2), and then enables the power.
Console(config)#interface ethernet 1/1
Console(config-if)#power inline maximum allocation 8000
Console(config-if)#power inline priority 2
Console(config-if)#power inline auto
Console(config-if)#
P O E
OWER VER
C
THERNET ONFIGURATION
4-174
4-95
4-95
4-94
3-141