Community Strings - SMC Networks 6824MPE INT Management Manual

I C
NITIAL ONFIGURATION
requested data or sets the specified parameter. The switch can also be
configured to send information to SNMP managers (without being
requested by the managers) through trap messages, which inform the
manager that certain events have occurred.

Community Strings

Community strings are used to control management access to SNMP
stations, as well as to authorize SNMP stations to receive trap messages
from the switch. You therefore need to assign community strings to
specified users or user groups, and set the access level.
The default strings are:
• public - Specifies read-only access. Authorized management stations
are only able to retrieve MIB objects.
• private - Specifies read-write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Note: If you do not intend to utilize SNMP, it is recommended that you
delete both of the default community strings. If there are no
community strings, then SNMP management access to the switch
is disabled.
To prevent unauthorized access to the switch via SNMP, it is
recommended that you change the default community strings.
To configure a community string, complete the following steps:
1. From the Privileged Exec level global configuration mode prompt,
type "snmp-server community string mode," where "string" is the
community access string and "mode" is rw (read/write) or ro (read
only). Press <Enter>.
2-10