SMC Networks 6824MPE INT Management Manual page 251

Web – Click IGMP, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown below.)
CLI – This example modifies the settings for multicast filtering, and then
displays the current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Igmp Snooping Configuration
----------------------------------------------
Service status
Querier status
Query count
Query interval
Query max response time : 20 sec
Query time-out
IGMP snooping version
Console#
Figure 3-90 IGMP Configuration
: Enabled
: Enabled
: 10
: 100 sec
: 300 sec
: Version 2
M F
ULTICAST ILTERING
4-261
4-265
4-266
4-267
4-268
4-269
4-262
4-263
3-201