Printronix SLPA8000 User Manual page 101

Hor Image Shift
This option specifies the amount to shift an image horizontally left (-) or right
(+) for precise positioning on the label. The actual width of the image is not
affected by this parameter. The allowable range is -1.00 through +1.00 inches
in .01 inch increments, displayed as xx /100.
The factory default value is 0.00 inches.
Orientation
This menu item selects the image orientation to be used when printing the
label.
•
Portrait (the default). Portrait refers to vertical page orientation, where
the height of a page is greater than its width. The top edge of the image is
parallel to the leading edge of the media. The following illustration is an
example, with the operator viewing the front of the printer.
FEED
•
Inv. Portrait. Inverse Portrait refers to vertical page orientation, where the
height of a page is greater than its width. The top edge of the image is
parallel to the trailing edge of the media. The following illustration is an
example, with the operator viewing the front of the printer.
FEED
MEDIA CONTROL Submenus
4 inches
media. the
6 inches
of edge leading
the to parallel
is image the
of edge top The
Leading Edge
Trailing Edge
4 inches
The top edge of
the image is
parallel to the
trailing edge of the
6 inches
media.
Leading Edge
101