Ethernet Address Submenus - Printronix SLPA8000 User Manual

Chapter 3
ETHERNET ADDRESS Menu

ETHERNET ADDRESS Submenus

IP Address
This item allows you to set the IP Address for the TCP/IP protocol in four
three-digit segments (SEG1 through SEG4). If the IP Address is assigned by
Bootp, ARP or DHCP, it is dynamic and read-only.
The factory defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
NOTE: When changing the IP Address, the printer resets the NIC (network
Subnet Mask
This item allows you to set the Subnet Mask for the TCP/IP protocol in four
three-digit segments (SEG1 through SEG4). If the Subnet Mask is assigned
by Bootp, Arp or DHCP, it is dynamic and read-only.
The factory defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
NOTE: When changing the Subnet Mask, the printer resets the NIC when the
Gateway Address
This item allows you to set the Gateway Address for the TCP/IP protocol in
four three-digit segments (SEG1 through SEG4). If the Gateway Address is
assigned by Bootp, ARP or DHCP, it is dynamic and read-only.
The factory defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
NOTE: When changing the Gateway Address, the printer resets the NIC
MAC Address
This item is the Manufacturer's Assigned Number, and is unique for each NIC.
It is read-only.
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options are Disable (the factory default) and Enable.
162
interface card) when the printer is placed online. When the printer
resets the NIC, the LCD displays DO NOT POWER OFF. After the
NIC has completed its initialization, the LCD displays E-NET INIT to
signal that the NIC and printer are in the initialization process. When
both the NIC and printer have completed initialization, the LCD
displays E-NET READY.
printer is placed online. When the printer resets the NIC, the LCD
displays DO NOT POWER OFF. After the NIC has completed its
initialization, the LCD displays E-NET INIT to signal that the NIC and
printer are in the initialization process. When both the NIC and printer
have completed initialization, the LCD displays E-NET READY.
when the printer is placed online. When the printer resets the NIC, the
LCD displays DO NOT POWER OFF. After the NIC has completed its
initialization, the LCD displays E-NET INIT to signal that the NIC and
printer are in the initialization process. When both the NIC and printer
have completed initialization, the LCD displays E-NET READY.