Operating Specifications - Printronix SLPA8000 User Manual

Operating Specifications

Operating Environment
The SLPA is designed for general use in warehouse and industrial
environments. It should not be exposed to liquids or damaging chemical
vapors, and will function properly in environments with an ambient
temperature between 40
exposure to dirt and dust is also recommended.
NOTE: Optional enclosures may be purchased to protect the products in
unusually harsh environments.
Power Requirements
A properly grounded, dedicated line supplying either:
115 VAC +10%, single phase @ 50 - 60 Hz
or
230 VAC +10%, single phase @ 50 - 60 Hz.
CAUTION
It is recommended that you isolate the SLPA from its power supply by
means of a surge suppressor to minimize any potential damage to the
equipment.
A suppressor which limits voltage to 400V and has a response time of
1-5ns is highly recommended.
Air Supply
The applicator system works with a regulated 80 to 100 psi (550 to 690 kPa)
air supply that is dust and oil free. A filter is provided that is equipped with a
mist separator to remove any condensation that builds in the line.
CAUTION
The pneumatic supply line should also be dedicated to maintain the
appropriate pressure range, thereby providing relief against excess
pressure. Providing such protection should prevent the supply pressure
from exceeding 135 psi (931 kPA).
o o o o
to 100 F (4 to 38 C). Minimizing unnecessary
Operating Specifications
23