Printronix SLPA8000 User Manual page 139

Label printer & smart label printer applicator
Table of Contents

Advertisement

Ignore Text
Disable (the default). When disabled, text in normal mode will be printed.
Attributes to be printed depend on the PGL Normal menu setting.
Enable. When enabled, any line of text (non-PGL commands) in normal
mode will be ignored.
Power on IGP/PGL
You can set the IGP/PGL feature so that it is enabled or disabled when the
printer is powered on.
Enable (the default). The IGP/PGL is enabled when the printer is
powered on. (The IGP/PGL feature is initialized in the Normal mode.)
Disable. The IGP/PGL is disabled when the printer is powered on. (The
IGP/PGL feature is initialized to the Quiet mode.)
Ext Execute Copy
Disable (the default). Dynamic data, overlay data, etc. are not allowed if
the optional Form Count parameter (number of forms to print) is specified
as part of the Execute command. (This setting is IGP-100 compatible.)
Enable. Dynamic data, overlay data, etc. are allowed within a form where
the Form Count parameter is specified in the Execute command. In this
case, the same form is printed for whatever the Form Count is.
Incremental data is not incremented since the printing page is the same.
The overlay data is only printed with the first form and not on subsequent
forms, and each form is printed on a separate page.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
Disable (the default). The printable data field is printed with the AI
enclosed in parentheses. This is the standard EAN/UCC-128 format.
Enable. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.
Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate set
of control function characters. See the description of the Code 128 barcodes
in the PGL Programmer's Reference Manual for details.
The range is 0-255, and the factory default is 14.
IPG/PGL Setup Submenus
139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lpa8000Slpa7000Slpa7000r

Table of Contents