Media Control Menu - Printronix SLPA8000 User Manual

Chapter 3

MEDIA CONTROL Menu

MEDIA CONTROL Menu
MEDIA CONTROL
Print Intensity
Print Speed
Print Mode
Transfer*
Media Handling
Tear-Off Strip*
Paper Feed Shift
Label Length
Label Width
4.1, 6.6, or 8.5 inches*
Ver Image Shift
Hor Image Shift
Orientation
Auto Map Select
Auto Label Width
Num Auto Labels
Slew Speed
Automatic*
Print Direction
Head First*
Continued at the top of next page
96
-3* -15 to 15
1
6 ips* 1-10 ips
Direct
Tear-Off
2
-0.50 to X inches
0.00 inches*
2, 4
4 or 6 inches* 00.1 to 99.0 inches
2, 4
2
-1.00 to X inches
0.00 inches*
2
0.00 inches* -1.00 to 1.00 inches
Portrait* Landscape
Disable* Enable
2, 4
4.1, 6.6, or 8.5 inches*
4
2 labels* 1-40 labels
Manual
6 ips*
Foot First
Peel-Off Cut
3
5
4
00.1 to 8.5 inches
3
Inv. Portrait Inv. Landscape
Notes:
* = Factory Default
Italicized items are available
when Admin User is set to
4
00.1 to 8.5 inches
Enable (in the PRINTER
CONTROL menu).
1
Maximvum value depends on
the width of the printer model
and printhead.
2
You can change the unit
value from inches to
4
millimeters under Units (in the
2-10 ips
MEDIA CONTROL menu)
when Admin User is set to
Enable (in the PRINTER
CONTROL menu).
3
Based on the current value
setting for Label Length (in
MEDIA CONTROL) up to a
maximum of 12.80 inches.
4
Maximum value depends on
the width of the printer model.
5
Maximum value depends on
model width and size of
DRAM installed.
Continuous