Cancel Key; Enter Key - Printronix SLPA8000 User Manual

Menu Key and Data Indicator Light
When the SLPA is either online or offline, the Menu key takes the SLPA
offline and into Menu mode.
In Menu mode, the Menu key scrolls through the Main menu of the SLPA's
operating system. It permits the operator to set or change various operating
parameters.
The Data indicator light on the Menu key is green when data is in the system.
This data refers to the information printed on the label. If the green light is off,
there is no data in the system. There is no manual operation of this indicator.

Cancel Key

NOTE: Cancel Key must be set to Enable in the PRINTER CONTROL menu
to use the Cancel key. The default is Disable.
When the SLPA is offline, the Cancel key clears the current print pattern and
all printing programs currently in the print buffer.
After clearing the print buffer, the SLPA automatically takes itself offline. The
SLPA may then have a new label pattern downloaded to the print buffer.
Press the Pause key to place the SLPA back online.
In Menu mode, the ↓ (down arrow) key scrolls the current menu selection one
level down.
↵

(Enter Key)

When the SLPA is online, the
Menu (page 180).
When the SLPA is offline, the
or parameter value within the submenus. Press
parameter.
↵
In Menu mode, the (Enter) key selects the current value.
Key and Indicator Descriptions
↵
(Enter) key selects the Applicator Delay
↵
(Enter) key is used to select a menu option,
↵
to select a menu option or
37