Optimized Ratio - Printronix SLPA8000 User Manual

Chapter 3
IGP/PGL SETUP
Var Form Adjust
This specifies an amount (in tenths of inches) to add to the length of variable-
length forms. Variable-length forms use a semicolon at the end of the
CREATE command: ~CREATE;<FORMNAME>;0.
Typically, variable-length forms are determined by the elements within the
form. The longest form element becomes the overall form length. This option
allows an additional space to be added to the form length.
The range is 00.0 to 03.0 inches, and the factory default is 00.0 inches.
Var Form Type
•
Add Nothing (the default). When selected, no action is taken.
•
Add ;0. When selected, the form length ends at the longest printed
element. (Same as
•
Add ;X. When selected, the form length is the same as the physical page
length (the Label Length menu under MEDIA CONTROL). (Same as
∼

Optimized Ratio

This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the IGP-
X00 printers.
•
Disable (the default). Use standard bar code ratios.
•
Enable. Select the alternate bar code ratios.
PI Slew Range
You can specify how many lines the paper will feed.
•
15. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move
1 line.
•
16 (the default). A paper slew of 0-15 will move 1-16 lines.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
•
Disable (the default). The printer ignores all carriage returns that are not
followed by line feeds.
•
Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
Skip Cmd Prefix
Stands for Skip Command Prefix. This parameter determines if the printer will
print any data before a PGL command is received.
•
Enable (the default). The printer ignores all data before a PGL command.
•
Disable. The printer will print all data before a PGL command.
138
∼
CREATE;filename;0)
CREATE;filename;X)