Forms Handling; Upc Descenders - Printronix SLPA8000 User Manual

Forms Handling

This submenu allows the user to handle the form in the following ways:
•
Disable (the default). No effect.
•
Auto Eject. Automatically ejects a page at the end of the job to spill out
the last page.
•
Auto TOF. Automatically does a form feed (FF) at the end of each form to
the next top of form.
PGL Normal
This option determines whether PGL passes the text data in Normal mode
according to LP+ or whether PGL will print the text data itself.
•
LP+ Menu (the default). PGL will pass the text data to LP+ only in the
default setting state (6 LPI, default character set, and font attribute).
•
PGL Menu. PGL will always print the text data itself.

UPC Descenders

This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
•
Always (the default). UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
•
Never. UPC/EAN bar codes are printed without descenders if the PDF
command is present.
•
Only With PDF. UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
I-2/5 Selection
This option is added to be compatible with a special IGP-X00 customization.
Usually, if Interleaved 2/5 bar codes have an odd number of digits, a leading
zero is inserted in front of the data. However, this special IGP-X00
customization gives you the option of adding a space character at the end of
the bar code instead.
•
Leading Zero (the default). A leading zero is inserted in front of the data.
•
Trailing Space. A space is inserted at the end of the data instead of a
leading zero.
•
X2 DPD. When selected, I-2/5 bar code with a magnification X2 will use
the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for
compatibility issues.
•
Modulo 7 CD. The I-2/5 bar code uses a modulo 7 check digit instead of
the default modulo 10 check digit.
IPG/PGL Setup Submenus
141