Printronix SLPA8000 User Manual page 103

When disabled, excess data in any program sent to the printer with
horizontally adjacent labels that exceed the physical page width of the printer
will be clipped or wrapped depending upon the setting of the Autowrap menu
option.
The options are Disable (the factory default) and Enable.
Examples
All of the examples below assume that the logical form length is set to the
label length.
Example 1: Simple Case
Problem: A file has been constructed with two horizontally adjacent 4" labels
for a printer with a physical width of 8". The user now wants to use this file
with a printer that has a 4" physical width.
Solution: The user sets Auto Label Width to 4" (the width of the label),
configures the Num Auto Labels to 2, and enables the Auto Label Mapping
feature.
Printer Operation: The printer will print the first (leftmost) 4" label first. Once
the first label has been completed, the printer will print the second 4" label.
These labels will appear vertically adjacent on the form.
Line-Matrix Printer Output
Label 1
Wide Web Width
Example 2: Uneven Number Case
Problem: A file has been constructed with three horizontally adjacent 2"
labels. The user now desires to use this file with a printer that has a 4"
physical width.
Solution #1: The user sets Auto Label Width to 4" (the width of two labels),
configures the Num Auto Labels to 2, and enables the Auto Label Mapping
feature.
Printer Operation for Solution #1: The printer will print the first two labels at
the same time. These first two labels will be horizontally adjacent. Once these
labels have been completed, the printer will print the remaining 2" labels along
with a blank 2" label.
MEDIA CONTROL Submenus
Thermal Printer Output
Label 2
Label 1
Label 2
Narrow
Web
Width
103