Wlan Leap; Wlan Leap Submenus; Auth Method; Leap Username - Printronix SLPA8000 User Manual

WLAN LEAP

WLAN
2
LEAP

Auth Method

Username

LEAP Username (01-15)

Open*
LEAP Username (16-30)
Shared
LEAP Username (31-32)
1
Kerberos
2
LEAP

WLAN LEAP Submenus

Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
•
•
•
•
LEAP Username
•
•
•

Reset LEAP User

Resets the LEAP user name to an empty string.

LEAP Password

•
•
•

Reset LEAP Password

Resets the LEAP password to an empty string.
LEAP Reset LEAP
User
Open (the default). Selects open authentication.
Shared. Selects shared key authentication.
Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
LEAP Username (01-15). The first 15 characters of the LEAP user name
(maximum number of characters is 32).
LEAP Username (16-30). Characters 16 to 30 of the LEAP user name
(maximum number of characters is 32).
LEAP User (31-32). Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).
LEAP Password (01-15). The first 15 characters of the LEAP password
(maximum number of characters is 32).
LEAP Password (16-30). Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
LEAP Password (31-32). Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
WLAN LEAP Submenus
* = Factory Default
1 = Only if a Symbol radio card is installed.
2 = Only if a Cisco radio card is installed.
LEAP
Password
LEAP Password (01-15)
LEAP Password (16-30)
LEAP Password (31-32)
Reset LEAP
Password
175