Battery Control Submenus; Battery Monitor; Time To Go; Percent Charge - Printronix SLPA8000 User Manual

BATTERY CONTROL Submenus

Battery Monitor

•
Disable (the default). When set to Disable, the other Battery Control
menus do not display. The Serial Port is restored to normal use, and the
Serial Port menu displays.
•
Enable. When set to Enable, the other Battery Control menus display.
The Serial Port is reserved for monitoring the power cart, and the Serial
Port menu does not display.
When Battery Monitoring has been enabled and the printer is online, the
second line of the LCD message displays the time remaining as "Batt
xxx.xx Hrs."

Time To Go

This displays the Time to Go status on the LCD in hundredths of an hour.
NOTE: This menu is available only when you select "Enable" in the Battery
Monitor submenu. When the power cart charger is connected to an
AC outlet, the Time To Go will be 0.00 Hours. This message updates
approximately every two minutes.

Percent Charge

This displays the Charge Percentage in tenths of a percent.
NOTE: This menu is available only when you select "Enable" in the Battery
Monitor submenu.

Current Draw

This displays the Current Draw in hundredths of an amp.
NOTE: This menu is available only when you select "Enable" in the Battery
Monitor submenu.
Voltage
This displays the Voltage in hundredths of a volt.
NOTE: This menu is available only when you select "Enable" in the Battery
Monitor submenu.

Amp-Hour Used

This displays the Amp-Hour Used in tenths of an amp hour.
NOTE: This menu is available only when you select "Enable" in the Battery
Monitor submenu.
BATTERY CONTROL Submenus
177