Chapter
3
PRINTER CONTROL Menu
PRINTER CONTROL Submenus
SMT: Status
See "Software Migration Tools (SMT)" in the RFID Labeling Reference
Manual .
•
Disable (the default). The printer disables the use of the Software
Migration Tools.
•
Enable. The printer enables the use of the Software Migration Tools.
PAA:Status
See "Software Migration Tools (SMT)" in the RFID Labeling Reference
Manual .
•
Disable (the default). The printer disables PAA functionality..
•
Enable. The printer enables PAA functionality..
LP+ Emulation
This item selects the line or dot matrix printer to be emulated by the printer.
•
P-Series (the default)
•
P-Series XQ
•
Serial Matrix
•
Proprinter XL
•
Epson FX
CTHI Emulation
This item appears only when the CTHI option is installed.
CTHI Emulation selects the operation of the CTHI option as either a standard
or simple protocol converter.
•
Standard (the default)
With a standard coax interface, the printer emulates the following IBM
coax printer models:
•
•
With a standard twinax interface, the printer emulates the following IBM
twinax printer models:
•
•
The standard Coax/Twinax emulation selection will only be available if
Coax or Twinax is selected from the HOST INTERFACE menu.
122
3287 Models 1 and 2
4234 Model 1
4234 Model 2
5225 Models 1, 2, 3, and 4