Printronix SLPA8000 User Manual page 67

A
Flow Control
Valve
Tamp Cylinder Air
Shut Off Valve
Figure 28. Return Speed Control Valve
2. Set the Cycle Delay time for the product sensor using the Applicator
Delay menu. (See "Applicator Delay Menu" on page 180.)
NOTE: The Cycle Delay setting determines the amount of delay from the
time that the product sensor detects the product to the time that the
applicator pad is online. Since the label prints first, be sure to account
for printing time. The longer the time entered, the farther back (closer
to the trailing edge) the label will be placed onto the product.
Conversely, if this value is set to zero, for example, the applicator pad
will launch as soon as the label is printed.
Begin by setting the Cylinder Extend time to 10 msec to begin this
adjustment procedure. (See "Applicator Delay Menu" on page 180.)
Label Application (Positioning) Adjustments
A
67