Printer Control Menu Options; Media Handling - Printronix T3306 Setup Manual

Printer Control Menu Options

Media Handling

This option specifies how the printer will handle the paper.
Tear-Off – After each label is printed, the printer waits for you to tear off
the label before printing the next one ( on-demand printing).
Cutter – Cuts continuous roll paper or labels without assistance.
Self-Strip – Prints and strips die-cut labels from the liner without
assistance. The printer waits for you to tear off the label before printing
the next one (on-demand printing).
Continuous – Printer prints paper and sends it out the front.
Printer Control
Media Print
Handling Intensity
–10
Continuous *
Tear Off
Cutter
Self Strip
10
–200/100
–199/100
Configuring the Printer
Print
Speed
2.0
.
2.5
.
3.0
.
.
0*
.
.
.
.
5.0 * (Default/Max for T3308)
.
5.5
.
.
.
8.0 * (Default/Max for T3306)
Shift in Shift in
Inches mm
–50.80
–50.75
. .
. .
. .
0/100 .00
. .
. .
. .
199/100 50.75
200/100 50.80
Figure 3–7. Printer Control Menu
Gap Ribbon
Sensor Saver
Reflective
Enable
Transmissive
Disable *
None *
Press
Press to select an option.
Press
menu.
= Factory Default
Ppr Feed
Shift
to view options.
to exit the configuration
3–27