Ethernet Params Submenus - Printronix SL5000E series User Manual

Chapter 3
ETHERNET PARAMS

ETHERNET PARAMS Submenus

Novell Protocol
•
Enable. The NIC will respond to the Novell protocol.
•
Disable. The NIC does not recognize the Novell protocol.
The factory default is Enable.
Nest Serv Type
You can change the Nest Server using this option, but consult your
administrator for the appropriate setting.
The options are Auto (the factory default), Bindery, and NDS.
NetBIOS Protocol
•
Enable. The NIC will respond to the NetBIOS protocol.
•
Disable. The NIC does not recognize the NetBIOS protocol.
The factory default is Enable.
Novell Frame
This menu option provides selection of the frame type for the Novell protocol.
For the definition of each frame type, refer to the appropriate
Novell-authorized documents.
The factory default is Auto Sensing.
ASCII Data Port
This option allows you to set the port number for ASCII print jobs. The data
port number needs to match your host system setting.
The range is 0 - 65535, and the factory default is 9100.
IPDS Data Port (IPDS emulation only)
This option allows you to set the port number for IPDS print jobs.
The range is 0 - 65536, and the factory default is 5001.
Keep Alive Timer
This is the time that the Keep Alive Timer will run. Keep in mind that with the
Keep Alive Timer on, the tcp connection will stay connected even after the
print job has terminated.
The range is 2-10 minutes, and the factory default is 3 minutes.
270