Moving Within The Configuration Menu - Printronix SL5000E series User Manual

Chapter 3
Overview

Moving Within The Configuration Menu

You can move through the configuration menus using the appropriate
navigation keys, as shown in Figure 2. (See "Controls And Indicators" on
page 35 for more details on the function of the operator panel keys.)
You can select different options and save them as the power on default;
however, you can only save them to configuration menus 1-8. The factory
configuration menu can be altered, but not saved.
When the printer is online, the first line of the LCD displays "ONLINE" and the
second line lists the active interface port and type of emulation.
To configure the printer:
1. Press the
"MENU MODE/QUICK SETUP" displays on the LCD.
2. You can move through configuration main menus in two ways:
•
•
NOTE: In menus with numeric ranges of more than 50 numbers, hold down
Step
1
2
3
4
5
6
Figure 2. Moving within the Configuration Menu
82
. .
key to enter the printer configuration menu system.
.
. .
Press the key to move to the right.
.
Press the + key to move right or the − key to move left.
the + or − key for more than 2 seconds to move through the range in
increments of 5. To move in increments of 1 again, release your hold
on the + or − key.
Press
OFFLINE
↓ ↵
ENTER SWITCH
&
UNLOCKED
. .
MENU MODE
.
QUICK SETUP
↓
Print Mode
UNTIL
Transfer*
+ –
Print Mode
or
Direct
↵
Print Mode
Direct*
LCD Notes
Allows you to make
configuration
changes.
Enables the printer
configuration menu.
Cycles through the
choices.
Selects the Direct
transfer mode.