Printronix SL5000E series User Manual page 231

Power-up ^F
(From page 178.)
•
Disable.
•
Enable. Selects free format mode as the power-up default, and selects
the graphics mode ^PY as the power-up default. Free format causes the
VGL to ignore carriage returns, line feeds, and all characters below 20
hex sent from the host.
The factory default is Disable.
Power-up ^PY
(From page 178.)
•
Disable.
•
Enable. Selects the graphics mode ^PY as the power-up default.
The factory default is Disable.
Power-up ^X
(From page 178.)
•
Disable.
•
Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode ^PY as the power-up default. All characters are ignored
until a ^A command is received.
The factory default is Disable.
PQ Label Fmt
(From page 181.) Allows selection of two methods of using Print Quantity
Label Formats (^PQ) for printing a label from memory.
•
List Format. A list of all stored print elements (graphics, text, and
barcodes) is reprocessed and executed again for each label. Works for
most applications.
•
Bitmap Format. The bitmap of the first label is stored and copied over for
each label printed without reprocessing a list of all print elements. Should
be used in applications that print labels of the same data only, as it
provides better print speed.
The factory default is List Format.
Preparser Command
(From page 181.) The incoming data will be checked for the string "HS" or
"JA" prior to entering the PPI1 emulation parser based on the HS Command
or the JA Command. Once the string is detected, the command will take effect
immediately.
The factory default is HS Command.
Overview
231