Ethernet Params Menu
ETHERNET
PARAMS
IP Address
xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx hhhhhhhhhhhh
Novell Frame
Ethernet 802.2*
3001*
802.2 Snap
(0-65535)
Auto Sensing
Ethernet II
Ethernet 802.3
* Factory Default
1
If you change the Ethernet speed setting,
you must also change the switch or hub
setting to match.
The ETHERNET PARAMS menu helps your printer communicate on a
network.
For information on assigning the IP Address, Gateway Address, Subnet
Mask, and MAC Address, refer to
You may also enable or disable the Novell or NetBIOS Protocols within this
menu, as well as selecting which Novell Frame scheme is used in processing
Novell signals. See Chapter 11, "Novell Configuration" for more details.
If the printer is connected to the Remote Management Software (RMS), the
RMS Port number and PPM Port Timeout settings must match the settings in
the Remote Management Software program.
IP Address
A numeric address such as 123.45.61.23 which identifies a printer or server in
a LAN or WAN.
Gateway
Subnet Mask
Address
PPM Port
PPM Port
Number
Timeout
100 secs.*
(1-255)
Auto Switching Submenu
MAC Address
Novell
Protocol
Enable*
Disable
1
Ethernet
Speed
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
NetBIOS
Protocol
Enable*
Disable
125